Common butterfly valves are clip-on butterfly valves and flanged butterfly valves. The wafer type butterfly valve uses a stud bolt to connect the valve between the two pipe flanges. The flange type butterfly valve has a flange on the valve, and the flanges on both ends of the valve are connected to the pipe flange by bolts.
If the electric butterfly valve is required for flow control, the main reason is to correctly select the size and type of the valve. The structural principle of the butterfly valve is especially suitable for making large diameter valves. Butterfly valves are widely used not only in general industries such as petroleum, gas, chemical, and water treatment, but also in cooling water systems for thermal power plants.
If the electric butterfly valve is required for flow control, the main reason is to correctly select the size and type of the valve. The structural principle of the butterfly valve is especially suitable for making large diameter valves. Butterfly valves are widely used not only in general industries such as petroleum, gas, chemical, and water treatment, but also in cooling water systems for thermal power plants.
Features:
- Fast and effective heat up, even on cold days- Temperature set at 175 F
- Melt-Proof inner liner (with heat sensitive dye to show mis-use or mal-function)
- Operating Light- RED shows when heating and GREEN when full temp is reached
- Dupont Nomex/Kevlar Insulation to keep the heat in and set Hot Pressures- Heat the entire carcass deep down
- Built Tough - Codura Exterior & high impact temperature controllers, full coverage Heating Elements
- Built and serviced in house
- Includes a nylon carry bag
- Can be used with all compound race tires
- Sold in sets of two
Image as below:
Tire Warmer, Tyre Warmers, Numerical Control Tyre Warmer, Standard Tyre Warmer
Ningbo Makeheat Electrical Appliance Co., Ltd , http://www.makeheat.net