During the operation of the tractor, the driver sometimes has a shifting and toothing phenomenon, which not only makes a harsh noise but also greatly aggravates the wear of the gear and even destroys the gear. When this happens, you should check the following items:
1. Whether the clutch free travel is kept within the specified range.
2. Whether the clearance between the clutch release lever and the release bearing is the same.
3. Whether the driven disc is warped.
4. Before the tractor of the single-cylinder engine shifts, the throttle speed should be reduced and then shifted.
5. When the tractor of the multi-cylinder engine shifts gears, the two-leg clutch method should be adopted to reduce the throttle speed and then lower the clutch pedal shift lever to set the neutral gear; relax the clutch pedal to increase the throttle to increase the speed; press the clutch pedal to change the shift lever Into the low gear. At this time, the low-speed main and passive gear tooth top line speeds are relatively close to easy to mesh and no toothing occurs. (é’彤)
Dental Alginate Mixer,Dental Amalgamator,Alginate Mixer Dental
Sofine Electric Co., Ltd. , http://www.sofine-dentistry.com