Mechanized tillage field how to do a safe operation

1) Reverse operation is strictly prohibited. When turning corners in the field, the machine should be slightly lifted to reduce turning resistance to avoid damaging the working parts. The work parts of the implements are to be stopped when transferring the land and adjusting the implements.
2) The adjustment of the cultivating depth of the walking tractor is controlled by the tail wheel or skid (for hydroponic use). Loosen the pinch handle on the tail wheel seat and move the outer tube of the tail wheel up and down to adjust the position of the tail wheel in a larger range. In general, the handle can be rotated to adjust the depth of cultivation. The use of the outer tube should be as appropriate as possible, and then use the handle to make a small amount of adjustment.
3) When plowing, attention should be paid to the direction of cultivation. As far as possible, only one large ridge or large furrow should be left in the field. Plows should be avoided as much as possible for long periods of overload to prevent deformation of the pallet.
4) In the towing cultivator, both ends should be close to horizontal when working in a universal joint. When the universal joint is raised in working condition, the rotation speed should be slowed down, and the lifting height should be limited so that the angle between two ends of the universal joint does not exceed 30.
5) When working, after the tiller and on the machine, stop the station to prevent accidents.
6) Farm implements driven by tractors require the driver to pay special attention to vigilance and be ready to cut off power to avoid accidents.
7) When parking, the tiller should land on the ground and must not be hung and parked.

5XZ-AB series Gravity Separator (Air suction type)

 

This machine is better for processing the seeds which have been primary selected. It`s based on the theory of granular and density segregation appearance in fluidization, and the different dimensions of the grain. It can select many kinds of seeds, such as wheat, maize, rice, barley and vegetable seeds etc, it also can use for selecting the commodity grain, removing the blighted seed, budding seed, damaged seed (by insect), rotten seed, deteriorated seed, moldy seed, non-viable seed, smut seed and seed with shell, and the light impurity, large heavy impurity and the small impurity which dimension is less than 2 mm. The germination rate, regularity , thousand-seed weight and neatness etc will improve .

This machine also can be used for primary selecting. It's forbidden to feed in straw, foliage , stick and Other big impurity, in order to avoid blockage. It will reduce the neatness after selected as material is too dirty.

This machine is suitable for kinds of seed company and agricultural products processing department.

This machine has many advantages, such as reasonable design, high performance, high capacity, easy operation, convenient migration and reliable running, also the aluminum-alloy vibratory body has many advantages as well, such as light weight, steady movement and long working life.

This machine is available for connecting with other Seed Processing Machine, and become a seed processing unit.

Air Suction Type Gravity Separator

Air Suction Type Gravity Separator,Paddy Corn Separator,Grain Seed Gravity Table,Grain Separator Machine

SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , http://www.seedgraincleaner.com