Features :
a. five different high speed
b. easier to operate in small part or radian.
c. more quickly and efficient than manual MTS Micro-needle
d. adjustable length of micro-needles(0.25mm-2.5mm)
e.Because high-speed vertical movement to reduce pain to a minimum, there is no cross-infection, using a one-time disposable needles.
Derma Roller is used for one of the following skin problem:
1. scar removal- including acne scar removal/ treatment
2. stretch mark removal / treatment
3. anti-aging, anti wrinkle
4. cellulite reduction or removal
5. hair loss treatment
6. hyper pigmentation treatment
Advantages:
A. Visual and noticeable improvement in a few days from the first treatment.
B. Short healing time.
C. No permanent damage or injury.
D. No bruising, infection, discoloration or other complications.
E. Extremely high absorption of any active ingredients.
F. Almost all skin types can be treated.
G. thickens the dermis without damaging or removing epidermis.
How to Operate
1. Setting
Adapter Mode
(1) Plug in DC adapter to the jack.
(2) Plug in DC adapter to AC outlet.
2. Preparation
(1) Take out needle cartridge in the sterilized packing.
(2) Fitting round slots 1 into 2 of machine, push needles cartridge horizontally up to the end .
(3) Lock the cartridge by turning it to the counter clockwise.
(4) Adjustment of needles length should be done after turn on the machine.
(5)If you want to remove the needle cartridge, turn it to the clockwise and push out horizontally, fitting round slots(slot 1,slot2)together.
3. Adjustment of speed and needle length
(1) Adjustment of Speed and ON/OFF
(2) 5speed level control
Pressing the switch 2 seconds to open the device, It starts from the lowest speed to highest speed when you turn on the power firstly.
The speed cycles low to high. Please press the switch 2 seconds when you need to stop the device.The flicker' s frequency of light faster, the speed is higher .
(3) Adjustment of needles length
You can adjust the length of needle by turning the adjustment ring clockwise or counter clockwise. Turning it clockwise, length of it will be longer .
product information:
| Classification | Contents |
| Model name | ARTMEX-V8 |
| Patented product | Yes |
| Purpose of Use | Permanent make-up & Micro-needle Therapy |
| Adapter | 100V-240V |
| Weight | 2350g |
| Size | 400mm*280mm*80mm |
FAQ:
1: About the delivery?
We can offer the door to door services by air or by sea, just depend on your actual request. Such as DHL,
UPS, TNT, FEDEX... by air; and the sea transportations.
2: About the delivery time?
Within 7 working days after payemnt received.
3: About the package?
Strong and beautiful aluminum alloy case.
4: About technology supports?
we have a professional technology supporting team for your timely services. We prepare the technical
documents for you, also you can contact us by telephone, webcam, online chat (MSN, skype...).
5: About the payment method?
Our payment terms is T/T, Western Union.
6: About the after-sale service?
We provide 6 months long warranty to customers
  rechargeable microneedle nano dermapen with replaceable needle cartridge Dr.Pen ULTIMA-A6
Features :
a. five different high speed
b. easier to operate in small part or radian.
c. more quickly and efficient than manual MTS Micro-needle
d. adjustable length of micro-needles(0.25mm-2.5mm)
e.Because high-speed vertical movement to reduce pain to a minimum, there is no cross-infection, using a one-time disposable needles.
Derma Roller is used for one of the following skin problem:
1. scar removal- including acne scar removal/ treatment
2. stretch mark removal / treatment
3. anti-aging, anti wrinkle
4. cellulite reduction or removal
5. hair loss treatment
6. hyper pigmentation treatment
Advantages:
A. Visual and noticeable improvement in a few days from the first treatment.
B. Short healing time.
C. No permanent damage or injury.
D. No bruising, infection, discoloration or other complications.
E. Extremely high absorption of any active ingredients.
F. Almost all skin types can be treated.
G. thickens the dermis without damaging or removing epidermis.
How to Operate
1. Setting
Adapter Mode
(1) Plug in DC adapter to the jack.
(2) Plug in DC adapter to AC outlet.
2. Preparation
(1) Take out needle cartridge in the sterilized packing.
(2) Fitting round slots 1 into 2 of machine, push needles cartridge horizontally up to the end .
(3) Lock the cartridge by turning it to the counter clockwise.
(4) Adjustment of needles length should be done after turn on the machine.
(5)If you want to remove the needle cartridge, turn it to the clockwise and push out horizontally, fitting round slots(slot 1,slot2)together.
3. Adjustment of speed and needle length
(1) Adjustment of Speed and ON/OFF
(2) 5speed level control
Pressing the switch 2 seconds to open the device, It starts from the lowest speed to highest speed when you turn on the power firstly.
The speed cycles low to high. Please press the switch 2 seconds when you need to stop the device.The flicker' s frequency of light faster, the speed is higher .
(3) Adjustment of needles length
You can adjust the length of needle by turning the adjustment ring clockwise or counter clockwise. Turning it clockwise, length of it will be longer .
product information:
| Classification | Contents |
| Model name | ARTMEX-V8 |
| Patented product | Yes |
| Purpose of Use | Permanent make-up & Micro-needle Therapy |
| Adapter | 100V-240V |
| Weight | 2350g |
| Size | 400mm*280mm*80mm |
FAQ:
1: About the delivery?
We can offer the door to door services by air or by sea, just depend on your actual request. Such as DHL,
UPS, TNT, FEDEX... by air; and the sea transportations.
2: About the delivery time?
Within 7 working days after payemnt received.
3: About the package?
Strong and beautiful aluminum alloy case.
4: About technology supports?
we have a professional technology supporting team for your timely services. We prepare the technical
documents for you, also you can contact us by telephone, webcam, online chat (MSN, skype...).
5: About the payment method?
Our payment terms is T/T, Western Union.
6: About the after-sale service?
We provide 6 months long warranty to customers
Â
Polymer material is a multi-phase composite system with polymer as the main body, that is, few products are made of pure polymer, and most of them are used together with Polymer Additives. The purpose of adding polymer Additives is: 1. to meet the performance requirements; 2. to meet the molding requirements; 3. to meet the economic requirements. Polymer additives include plasticizers (DBP, DOP), phosphate esters (TCP trimethylphenyl phosphate), aliphatic dicarboxylic acids, lubricants, heat stabilizers, processing aids, reinforcing agents, toughening agents, curing agents, antioxidants, light stabilizers, fillers, solvents, foaming agents, and resistances. Propellant, coupling agent and antistatic agent.
Our Services
1. OEM(????) service is available.
2. Fast producing time.
3.Cheapest price forproduces.
4. Reply promptly in 24 hours.
5.Free sample available.
FAQ
Q1: product specifications?
A: we will pack the product specifications according to your needs.
Q2: Do you have some videos where we can see the line production?
A: Yes, we can provide some videos for reference. (yes, we can provide some videos).
Q3: How about payment terms? What kind of payment terms do you have?
A: 30% TT deposit + 70% TT before shipment, 50% TT deposit + 50% LC bala
Nce, Flexible payment can be negotiated.
Q4: what advantages do you have?
A: the quality of the products we offer can be guaranteed and will provide you with very competitive prices.
If you have any questions, please contact with us directly. Organic Intermediate are produced by HRT bearing With High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, please send mail directly to us.
4 Formylmorpholine,4-Formylmorpholine 99%,Pentamethyldiethylenetriamine 98%,Synthetic Fiber Spinning Oil
Shandong Chenyi Environmental Protection Technology Co.,Ltd , http://www.chenyichem.com