The automatic cool skin machine is repeatedly tested and developed into a new type of equipment through the repeated trials of our company's scientific and technical personnel. The cool skin machine is compact in structure, energy saving, convenient and hygienic, uniform in thickness and refreshing. The machine can not only produce cool skin but also make rice, rice flour, dough, river powder and Other products. A multi-purpose machine, easy to operate, fast and efficient, clean and hygienic.
With the arrival of winter, the temperature drop and the changes in people's consumption habits, the new and old customers are reminded to pay more attention to the impact of temperature changes on machine operation. In general, the main factor affecting the operation of the cool skin machine is the temperature change, mainly the following:
First, the low temperature has a certain influence on the lubrication of the bearing parts of the machine transmission parts, which will aggravate the degree of wear of the original lubrication and dry parts. Therefore, it is necessary to supplement the lubricating oil of bearings, gears and other parts according to a certain time (generally recommended for every 1000 Additional hours of operation hours), check more when the temperature drops suddenly in winter.
Second, the influence of low temperature on the heating element and the temperature of the steamer. It is recommended not to directly feed the conveyor belt after starting the machine. After the temperature of the steamer is indicated to the normal operating temperature, the heating switch is turned off, and the temperature is turned on for about 5 minutes before being turned on for normal production. . If heating for a long time, the temperature indication still does not reach the standard operating temperature or the temperature rises too slowly. Check the heating components (such as the electric heating heating coil) or the temperature sensor in time to avoid affecting and damaging other components.
Third, the production of cool skin is to remember that water and noodles that are too hot can be used. After the cold skin is cut, it is also necessary to pay attention to anti-freezing ice.
Fourth, the water-absorbing parts, especially the parts of the squeezing nozzle, water tank, sealing ring, etc., must be protected against freezing. After the end of production, keep warm or dry the pulp, prevent icing from freezing or freeze-frozen parts. .
OT Equipment,High Quality OT Equipment,OT Equipment Details, STANDARD STEEL
WuYi AnBo Medical Equipment Manufacturing Co.,Ltd , http://www.anbomedical.com