Electromagnetic induction aluminum foil sealing machine should pay attention to the following situations during use:
1. Electromagnetic induction aluminum foil sealing machine is not suitable for metal containers and metal bottle caps and anodized aluminum spray paint caps. It is not allowed to press the heating button on the metal table surface, otherwise the machine will be damaged. If you encounter metal caps and anodized aluminum spray caps, you can first seal the aluminum foil and then screw the cap.
2. During the use of electromagnetic induction aluminum foil sealing machine, the operator should always pay attention to the temperature of the sensor head. If the hand feels too hot (about 80 °C), stop working. When the sensor head is naturally cooled or the fan is aligned with the sensor head. Quickly cool, and then start working when the temperature of the sensor head drops to about room temperature (25 °C), so as not to damage the temperature of the sensor head.
3. This machine is equipped with automatic temperature overheat protection function. When the temperature inside the machine is overheated, the green “overheat indicator†lights up. At this time, the internal cooling should be standby or the green light should be off immediately.
4. Always check the color of the white plastic wood board in front of the sensor head. If it is found that the burnt color is serious, please unscrew the screw cap of the sensor head to check whether the induction coil has carbonized or peeled off the insulating paint. If this phenomenon occurs, it should be timely. Replace the sensor head or induction coil to avoid continued damage to the main unit.
5. When the area of ​​the induction aluminum foil is too large, the time display will immediately go to zero after pressing the sensor switch. If there is no induction or red “over-current indicator†flashing and accompanied by the “嘀†alarm sound, it should be increased appropriately at this time. Normal work can be performed after the distance between the sealed object and the sensor head. Items such as rubber sheets can be used as baffles, and metal materials should not be used instead.
Tattoo Clip Cord,Clip Cord,Silicone Clip Cord
Danyang Trading Co., Ltd. , http://www.gdtattoomachine.com