Mothers catch a cold and the baby can’t escape. In general, viral infections pass directly into the fetus through the mother’s placenta. Therefore, once a mother is infected with a viral infection, the fetus will also suffer from the virus and the cold will be filtered. It is caused by a virus infection, so the baby will also catch a cold with her mother.
According to a foreign report, more than a dozen pregnant women with cold virus have been isolated. Among them, some viruses have obvious teratogenic effects on the fetus. Most of the colds are caused by the common cold virus, and some are caused by the influenza virus. Light people only have headaches, low fever, poor appetite, nasal congestion, and runny nose. Severe cases can cause high fever above 39° C. for several days. At high temperatures, the toxins produced may also enter the fetus through the placenta, affecting the development of fetal brain cells, especially in the early stages of pregnancy.
However, once the early pregnancy is over, the impact of a cold is less severe because the fetus's heart development has gradually stabilized and its volume has gradually increased. The impact of the cold on the fetus has been reduced to a minimum.
However, if it is a serious cold, even after mid-pregnancy, prolonged high fever and lack of appetite will hinder the development of the fetus in the womb. By the end of pregnancy, coughing is extremely rare, but it can easily lead to early breakage and even premature delivery.
The best cold therapy "drink plenty of water and more rest" is definitely the best treatment strategy for overcoming colds. Drinking water can help the body to release harmful substances. If you have a fever, you can also reduce the body temperature.
Rest is to give the body extra strength to fight the cold virus and reduce the chance of complications. If symptoms continue to worsen under proper rest, you should seek medical advice as soon as possible, because some of the more serious diseases (such as meningitis, etc.), and their early symptoms are similar to colds.
Pregnant women due to physical conditions should choose appropriate and safe ways to drive away the common cold.
1. See a doctor for treatment and take medicine on time.
2. Maintain a happy and peaceful mood, strengthen immunity, and help restore.
3. Put down the heavy work at hand, rest more, avoid fatigue and stress, and reduce the occurrence of complications.
4. Bathing in warm water to improve blood circulation helps boost the spirit and ease discomfort.
5. Drink more water (more soup), supplement body fluids that are lost when a person has a fever, and help excrete toxic substances.
6. Remember taboo! When the sore throat, eat less spicy food, fried fried fried foods; cough, eat less oranges, oranges and other citrus fruits; gastrointestinal discomfort, should not drink cold drinks, but also eat less greasy food.
7. Take vitamin C properly and slow down symptoms such as cough and sneezing.
To prevent colds, soak in hot water and soak your feet for 15 minutes every night with hot water. The amount of water should not be too high. After the soaking, your feet should turn red.
When you eat green onions and eat green onions, you can heat the oil and pour on thinly chopped green onion, and then eat cold with tofu.
Cold water wash your face daily with cold water. Wash your nostrils with a handful of water, use your nostrils to gently inhale a little water, and then scoop them out several times.
Massage the nasal sulcus with both hands to face the pimple, palm hot massage back Ying Xiang (located in the nasal ditch, the midpoint of the outer edge of the flat nose) more than 10 times.
Breathing vapors When a pregnant woman starts catching a cold, pour boiling water into the cup, take a deep breath of heat, and cool it until the water in the cup cools several times a day to reduce the symptoms of nasal congestion.
Hot air blowing When a pregnant woman starts cold, you can use a hair dryer to blow hot air for 3 to 5 minutes to the temples several times a day to relieve symptoms.
Isolation clothes, also known as clean work clothes, clean work clothes, purification clothes, dust-free clothes, sterile clothes, anti-static work clothes, dust-free work clothes, work clothes, protective clothes, etc.
In addition to the fact that clothing itself cannot be a source of dust emission, it also has the effect of preventing dust from being emitted by the human body. At the same time, as a sterile clothing, it should have basic properties such as safety protection, comfort, ease of operation, aesthetics, etc. in materials and design. Otherwise, due to the different styles, fabrics and sterile underwear of the work clothes, it directly affects the number of dust and colonies in the clean room.
Widely used in electronic, pharmaceutical, food, biological engineering, optics, aerospace, aviation, color tube, semiconductor, precision machinery, plastics, paint spray, hospitals, environmental protection and other industry clean workshops, there are a variety of colors and specifications suitable for different anti-static Or clean environment.
* Performance editing
100% high-density polyethylene material, one-piece hooded design, breathable and moisture-permeable, can block the penetration of fine dust and liquids, and at the same time allow water vapor to permeate; light and tough, prevent the accumulation of static electricity, it does not produce dust , Free of silicon.
It is made of special polyester filament, warp or warp and weft inlaid with Japanese bell spinning 9R series conductive fiber, and manufactured by a special process. Has excellent, long-lasting conductivity. It is a necessary measure for anti-static of personnel clothing.
The charge of work clothes: <0.6 micro library / piece. Charge area density: <7 microbanks / square meter.
(Annotation of "micro-coulomb": "coulomb" is a unit of charge measurement, 1 coulomb = 1000 milli-coulomb = 1,000,000 micro-coulomb. 6.25 × 108 electrons carry 1 coulomb, and the power of one electron belt is 1.6 × 10 19 coulombs).
* Fabric editing
The fabrics used are: fabrics containing conductive silk, gabardine, yarn cards, TYVEK (acid and alkali resistance), etc.
Conventional optional fabrics: 5mm strip type, 5mm mesh, 2.5mm mesh fabric conductive silk, its anti-dust and anti-static effect is getting stronger and stronger in order; this is also selected according to the clean room level, generally CLASS10000 The clean room below (ten thousand area) should use 5mm strip conductive silk, CLASS1000 (thousand level area) and 5mm grid should be used; CLASS100 (100 level area) clean room should use 2.5mm grid fabric conductive silk.
Isolation clothing fabric-like characteristics
1. Japanese original parallel wire processing technology, with excellent anti-static performance, is permanent and can effectively discharge human body electrostatic charge;
2. The clothing itself is not dusty, non-sticky, has good barrier properties, high density, high strength, can effectively sterilize, and inhibit bacteria
3. Good washing resistance, bending resistance, abrasion resistance, etc., washing resistance ≥100 times, high temperature steam temperature: 120 ℃;
4. All-over-seaming process of special equipment imported from Japan, one-time forming, good dust resistance, can be used in 10-10 thousand grade clean room;
5. Especially recommend the production and sales of breathable anti-static clean clothes.
* Advantage edit
1. The fabric itself does not produce dust: because it is worn in a clean room, the fabric must not be a source of dust in the clean room, which determines that ultra-clean fabrics can only be produced with chemically synthesized long fibers. Natural short fibers such as cotton, hemp, and silk cannot be applied to ultra-clean fabrics, although these raw materials can make the fabrics more wearable. At the same time, it is required that the selected chemical fiber filaments also strictly control the amount of dust generated. Generally speaking, fully matt polyester filament is not suitable for weaving anti-static ultra-clean fabrics. Because the matting agent added in the production of polyester-titanium dioxide will become a source of pollution.
2. The fabric should have good dust filter: the dust in the clean room mainly comes from the air flowing in the room and the human body moving in the room. When the equipment conditions are determined, improving the cleanliness means that the fine dust generated by the human body should be controlled in the clothes to the maximum, and let it pass through the fabric and enter the air. This is the so-called fabric filter rate is higher. Increasing the dust filtration rate is at the expense of the breathability of the fabric, so knitted fabrics and woven fabrics that are more loosely woven are not suitable for clean rooms.
* Edit specifications
The fabrics used are: fabrics containing conductive silk, gabardine, yarn cards, TYVEK (acid and alkali resistance), etc.
Conventional optional fabrics: 5mm strip type, 5mm mesh, 2.5mm mesh fabric conductive silk, its anti-dust and anti-static effect is getting stronger and stronger in order; this is also selected according to the clean room level, generally CLASS10000 The clean room below (ten thousand area) should use 5mm strip conductive silk, CLASS1000 (thousand level area) and 5mm grid should be used; CLASS100 (100 level area) clean room should use 2.5mm grid fabric conductive silk.
Disposable Isolation Clothing,Disposable Isolation Gown,Disposable Medical Isolation Gown,Disposable Hospital Isolation Gown
Guangzhou Aikangli Medical Technology Co., Ltd. , https://www.aikanli.com