Operation sequence Engine start Check if gasoline and oil are added. The fuel valve is in the "ON" position. Whether the throttle is pulled to the maximum position. Whether the throttle handle has 1/2 position. Pull the recoil starter. After starting, push the throttle valve handle to the original position.
The rice transplanter drove into the paddy field and pushed the hydraulic operating handle downwards to raise the body. Put the gear lever to the position of the "Pushing" and close the main clutch to enter the paddy field.
Replenishment of seedlings When the seedling box extension plate is used to supply the seedlings, the seedlings are pulled out of the seedling box extension board to prevent the seedlings from bending backwards.
When taking the seedlings, raise the side seedlings of the seedling plate and insert the seedlings.
When there are no seedlings on the scull box, be sure to move the seedling box to the left or right and replenish the seedlings.
Before the seedlings reach the position line of seedlings, they should be given supplies. If you supply more than the supply position, the number of holes will be reduced. When replenishing the seedlings, pay attention to the alignment of the remaining seedlings with the seedlings.
How to Use the Marker Use a marker to maintain a straight line. Use method: Check whether the insertion clutch handle and hydraulic operating handle are in the "connected" and "down" positions, respectively. Swing the marker bar on the side of the next insertion, so that the marker extends, and the insertion is made on the top soil. The line drawn by the marker is the center of the body on the side of the next insertion, and the center mark is aligned with the line drawn by the marker when the switch is inserted.
How to use the side marker In order to maintain a uniform line spacing, use the side aligner. When transplanting, align the side aligner on the front side of the side floating board with the seedling row that has been inserted, and adjust the line spacing.
One of the items to be confirmed before the transplanting operation is to clarify the shape of rice fields and determine the direction of transplanting. The second is that the first four rows are the benchmarks for inserting the next row, and special attention should be paid to the operation to ensure the straightness. The third is the transplanting operation before the start, check the following matters: whether the shift lever is dialed into the "transplanting" speed gear; whether the belt handle is hung up; whether the hydraulic operating handle is set to the "drop" position; whether the plug clutch handle is dialed to " "Connect" position, slowly swing the throttle handle to the inside, and the rice transplanter advances while planting.
The safety clutch is a protection device against overloading the planting arm. If the planting arm stops and sounds “咔†or “咔â€, it means that the safety clutch is operating. At this time, the following measures shall be taken: the clutch handle is quickly cut off; then the engine is extinguished; check whether the stone is sandwiched between the seedling and the picking pin, the planting arm and the floating plate, and if any, remove it in time; if the pintle is deformed, check it. Or replace it. By pulling the recoil starter, confirm whether the burble needle rotates freely, and remove the seedling that has not been inserted in the lateral movement of the seedling box before starting.
Turning the line feed When the rice transplanter moves straight in the field one line at a time. After the work is over, switch to the following method according to the following instructions: First, set the plug-in clutch to the “OFF†position, lower the engine speed, and set the hydraulic operation handle to “up†Position the body to raise; second is to lift the handle up slightly, rotate the side clutch and twist the body at the same time, pay attention to the floating plate does not press the top soil and gently rotate. Do not forget to turn back and extend the marker in time.
Honghui capsule produces gelatin hollow capsule in large scale with well-equipped facilities.
The gelatin hollow capsule is a shell with special color and shape, made of the main raw material of gelatin. It is always used as special packaging of medicines or health care products which have bad smell, light sensitive of unstable,.
The capsules do not need adhesives and numerous excipients during the production process, easy to disintegrate and release in gastric juice.
Size 00 Gelatin Empty Capsules
00 Capsules,00 Gelatin Capsules,00 Gelatin Empty Capsules,Size 00 Gelatin Capsules
Zhejiang Honghui Capsule Co.,Ltd , https://www.hhcapsule.com