When applying stickers to apples, it's common practice to first bag the fruit before placing the sticker. For self-adhesive paper labels, it's best to apply them around September 20th, while plastic film labels are typically applied between September 25th and 30th. The ideal time to apply the stickers is when the apple has reached a weight of approximately 250 grams. For self-adhesive paper labels, they should be placed on the top side of the fruit, whereas plastic film labels need to be attached to both sides of the top surface. It’s important not to place them directly on the sun-facing side, as this can cause sunburn damage to the fruit.
Before applying a paper sticker, gently wipe off any dust or powder from the apple's surface. Then, position the label carefully on the fruit and press it down starting from the center and moving outward with your fingers and thumb. Make sure your hands are clean to avoid transferring dirt or debris onto the back of the label, which could affect its adhesion and overall appearance.
For plastic film labels, begin by cutting the character mold into smaller pieces. Apply a small amount of medical vaseline oil evenly on the back of the label, then press it firmly onto the fruit's surface, again starting from the center and working outward with your thumb. If the label is large, you can first apply it to a Vaseline-coated plate, then carefully transfer it to the fruit. If the label appears uneven after application, gently smooth it out to ensure a neat and professional look.
In addition to these steps, it's also important to check the quality of the stickers before application. Ensure that the materials are free from cracks or defects that might affect their performance. Proper storage of the stickers in a cool, dry place before use can also help maintain their adhesive properties. By following these detailed instructions, growers can ensure that their branded apples look attractive and remain in good condition throughout the harvesting and selling process.
Magnetostrictive System Scaler
A magnetostrictive system scaler is a dental instrument used for removing calculus and plaque from the teeth. It utilizes high-frequency vibrations generated by a magnetostrictive transducer to break down and remove the deposits from the tooth surface.
Magnetostrictive System Scaler,Cavitron Type Scaler,Dentsply Type Scaler,Dental Magneto Scaler
Rolence Enterprise Inc. , https://www.rolencedent.com