The electronic tension machine is installed in a clean and monotonous room with uniform temperature. At the same time, it should be considered to be able to make a long long beam bending test on the machine and the feasibility of using the mirror extension to stop the experiment, so it should be around the experimental machine. Leave enough free space.
The electronic tension machine body and the dynamometer are not required to be installed with special foundations. Only the foundation foundation is used to make the ordinary foundation and the anchor screw holes can be poured.
Looking for the main level of the electronic tension machine , you can place the level on the outer circle of the cylinder and find the level according to the position and horizontal direction of the frame. Find the ±1 grid with the accuracy of 0.10/1000 mm, not below the base. Add horns to adjust.
There are two holes on the top of the dynamometer for the wire rope to be used for reinstallation.
The level of the electronic tensile dynamometer is very important. When looking for the level, align the left front of the pendulum with the reticle of the standard wire plate so that it does not move. Then use the curved ruler to lean against the large surface of the upper part of the pendulum to 0.1/1000. A millimeter level is placed on the curved ruler to find ±2 grids. If it is not right, add a horn under the base, and it must be placed and not placed. The pointer must be aligned to zero.
The electronic tension machine can open the upper iron gate of the dynamometer to reflect the line of the small wire hammer. It can be wound around the groove of the pointer coaxial pinion. The length of the tether should be appropriate, not too long or too short. For Zui long can not touch the evacuation remember on the diaphragm, Zui short for the pinion rotation one week aging hammer will not touch the pinion.
The details of the electronic tension machine are mainly highlighted by the interconnection of various components.
Disposable Pen Injector,Injection Pen,Disposable Injection Pen,Pen Injector
Shanghai Enjosim Medical Technology Co., Ltd, Jiangsu Enjosim Medical Technology Co., Ltd , https://www.enjosimmedical.com