1, do not automatically send the belt 2, the baler does not retreat belt 3, the baler does not automatically cut the belt 4, the baler has poor bonding effect 5, the baler does not move when the belt is inserted, the whole machine does not move 6, the continuous packing action 7 If it is not tied, it will be cut off, not tightened (big circle)
8, the tightening force is small 9, the light is tightened and not cut.
The main problems of automatic baler maintenance are:
1. The power light does not light. The machine does not work. 2. The power light is on. The machine does not work. 3. The machine does not work in the belt. 4. The PP belt does not reach the sticking point. 5. The belt does not stop. 6. The strap is not correct. 7. When the strapping is PP. The belt is not fully retracted from the bow frame. 8. The PP belt falls out of the bow frame. 9. The PP belt is out of control at the bonding point. 10. The heater temperature is not raised.
10000Hz High Frequency LiDAR Module
10000 Hz is one of our 2021 new solutions products,which can be widely used in drone postioning, car anti-collision, intelligent traffic monitoring etc. with high accuracy. We support customized service of different frequency(100hz,200hz,300hz,400hz,1000hz,5000hz,10000hz etc.), you can choose the suitable design. And the LiDAR module is a small size with 43*35*21mm, customers can be integrated to their measure device easily. If you meed any documents(PDF files etc.) of JRT high frequency LiDAR distance sensor, please contact us now.
Some key features may help:
Accuracy: ±3~5cm(<50m) /±1%(>50m)
Range: 0.1-200m
Resolution: 1cm
Frequency: 100/200/400/1k/5k/10khz
Laser type: 905nm,Class I
Size: 43*35*21mm
Weight: 20g
Input voltage: 8-36V
10000Hz High Frequency LiDAR Module,LiDAR,High Frequency LiDAR Module,10000Hz LiDAR Module
Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserrangfinder.com