Feed processing and farming increase efficiency

One, shredded straw, potato vines, grass, hay, etc. should be chopped and fed. The grass that feeds pigs is cut into 1 to 2 centimeters to achieve the effect of “three-knife and three-knife without any material”. Second, powdered hay, grain and other feed must be fed after milling to help digestion. The degree of chalking should be based on feed and livestock species. Pigs, cattle feed can be crushed into 1 ~ 2 mm, chicken feed should be ground into a fine powder. Third, the slurry tuber and beans feed should be soaked after the feeding, which is not only conducive to digestion and improve feed utilization, but also reduce hydrogen and other toxins. Fourth, the dried green feed is rich in nutrients, and it should be air-dried and stored immediately after harvesting so as to avoid rapid microbial growth and deterioration, but it should not be exposed to sunlight to avoid vitamin loss. Fifth, soften the corn, sorghum, etc., before soaking with light salt water, soften and then feed, can save feed, easy to digest. Sixth, sprouting grain feed germination and growth to 10 cm, the vitamin content is extremely rich, is a good source of vitamin feed for breeding animals and livestock. 7. Basification alkalinization with quicklime milk, so that the feed can be soaked, soaked for 24 hours and then fed, not washed with water. Alkalizing the feed can increase its nutritional value, utilization, and feed intake. 8. Saccharification: Add 100 kg of roughage to the prepared fermented yeast (Qiju) 1 to 2 kg, add 100 kg of water and stir into the cylinder to seal it, then raise the temperature to 40°C and feed again. After the feed is saccharified, it has the characteristics of acidity, sweetness, aroma, and softness, excellent palatability, and significant feeding effect. Nine, ammoniated rough cut into 2 to 3 cm long, according to every 100 kg of roughage by adding 15% of ammonia 12 to 15 kg. Layered compaction, layer by layer spray ammonia, and finally sealed, at 25 °C ~ 30 °C under 7 days of ammoniation can be opened, until the ammonia volatilized net feed. X. Heated beans should be fed after cooking to destroy the antitrypsin in the beans, increase methionine and cystine, and increase the biological value and palatability of the feed. XI. Acidification Stir with appropriate amount of phosphoric acid to store green fodder, and then add a little Glauber's salt, can increase the sulfur content of feed, help increase the vitality of lactic acid bacteria, improve feed nutrition. Twelve, storage and storage of green fodder in pits, tanks, pools and plastic bags, it can be fermented under anaerobic conditions to generate lactic acid, maintain nutrition and improve digestibility.

Tattoo Thermal Paper:
Tattoo thermal paper is a thermal cocan which can help to transferred flashes onto the skin,making sure that the tattoo gets exactly what he or she wants.This is helpful for people who have their own designs which they which to have tattooed.
Thermal Paper Characteristics:
1,Top layer is white,it is the layer that your images will be transferred onto.
2,Second layer is not bound and is a milky white.
3,Third layer by pressing on this layer the pruple/blue coating is transferred to the upper sheet.
4,Fourth bottm layer holds the original in place when using a stencil copy machine.

Tattoo Thermal Paper

Tattoo Thermal Paper, Tattoo Thermal Transfer Paper, Tattoo Transfer Paper

Paddy Irons Tattooo Factory , http://www.paddyironstattoo.com