Method for avoiding dust explosion in mixing equipment

Dust explosion means that the dust is within the limits of the explosion. When it encounters a heat source (open flame or temperature), the flame instantaneously propagates through the entire mixed dust space, and the chemical reaction speed is extremely fast, and at the same time, a large amount of heat is released, forming a high temperature and a large pressure. .

There are two possible dust explosion spaces in the use of the mixing equipment, which is the factory floor where the mixing equipment is located and the inside of the mixing equipment cylinder. So should we prevent this from happening?

1. Keep the airtight state during work, and keep the gap between the stirring shaft and the cylinder wall in the mixing equipment, so as to avoid the fire caused by the mechanical friction.

2. The interface can also maintain dust-free leakage, and the motor can be equipped with an explosion-proof motor.

3, the motor can be used explosion-proof motor, while avoiding smoking in the working environment.

In terms of size, the hybrid equipment is currently 30 cubic meters in China. For the mixing process and mixing requirements, the mixing equipment can be divided into experimental type 0.05~0.5 cubic; production type 0.5~6 cubic; batch type 4~30 cubic, high production capacity is not high, mainly for enterprise investment production products The amount of demand, so estimate the annual production and growth before purchasing the mixer to decide which kind of mixer equipment to buy. After considering the size required for mixing, the mixer inlet, observation window, and installation form should be considered. In the single machine utilization, the site can be arranged according to the standards we provide. The reasonable and proper arrangement of the process will make the production line. More refined, in one go.

Mixer production lines can be large or small. Simple form to complex automated production line configuration, simple process can have a single mixer platform structure, equipped with screw feeder to improve loading, electrical control operation, packaging and bagging is simple, is a very economical and practical process . At the same time, it can also be modified according to the production standards of the production enterprise, and the operation is very convenient.

Erythritol For Jams

Erythritol For Jams,Making Jelly With Erythritol,Sweeteners With Erythritol,Natural Erythritol Sweetener

Ningxia Eppen Biotec CO.,LTD , https://www.nxeppen.com